You are watching: Why is my hp printer light blinking
The following sections describe the many prevalent errors indicated by combinations of blinking (flashing) lights displayed on the control panel, adhered to by services for each combination. Find the blinking lights pattern you are experiencing, and also then follow the procedures to resolve the worry.
This condition might be caused by a carriage jam and also can likewise encompass an error message that screens on your computer. The complying with manage panel light pattern displays:
Tright here are four various locations wbelow jammed paper can come to be blocked. Clear any jammed paper from one location, and then try to print aacquire. If the error persists, check the following area for any kind of jammed paper.
Press the Cancel switch (
) to attempt to immediately clear the paper jam.
Gently remove any type of jammed paper and bits of torn paper from the input tray. To avoid tearing any totality sheets of paper, pull the paper via both hands.
On the printer in front of the input tray, lift and also organize the input tray shield, and then use a flashlight to thoapproximately check for torn pieces of paper or international objects in the input tray.
If any type of torn pieces of paper or foreign objects reprimary inside the printer, even more jams are likely to happen.
The input tray shield stays clear of foreign debris from falling into the paper route and resulting in paper jams. Do not rerelocate the input tray shield.
Gently remove any type of jammed paper and also bits of torn paper from the output tray. To stop tearing any type of whole sheets of paper, pull the paper via both hands.
Use a flashlight to thoroughly check the rollers for torn pieces of paper that can reprimary inside the output tray.
Remove any kind of jammed paper from the paper course and also ink cartridge accessibility area from the inside the printer.
You must disattach the power cord prior to getting to inside the muzic-ivan.info printer to prevent risk of injuries or electric shock.
Use a flashlight to thoroughly examine the rollers for torn pieces of paper that could reprimary inside the ink cartridge access area.
Lower the input tray back right into the printer, close the output tray extender, and then push the output tray right into the printer.
See more: Get The Killing Blow On 4 Sentients, Get The Killing Blow On 6 Sentients
Use a flashlight to thoapproximately examine the rollers for torn pieces of paper that could reprimary inside the cleanout area.